| NTN CRTD9408 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Grease Speed Rating Open/Shielded n1:9500 rpm; Oil Speed Rating Open/Shielded n2:12000 rpm; Sealed Speed Rating n3:6300 rpm; Accessories:One Shield & Snap-Ri; Basic Dynamic Radial Load Rating C:20800 N; D:68.0000 mm; B:15.00 mm; Basic Static Radial Load Rating Co:11600 N; d:40.000 mm; Fillet Radius ra:1.00 mm; |
| SKF 350901C DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Fatigue Load Rating (kN):0.44; B:12mm; Weight:0.13 KGS; d:50mm; Seals or Shields:Open Type; Preload:Light; Clearance:Standard; Grease Limiting Speed (r/min):17000; SKU:71910cd/p4adga-skf; D:72mm; Availability:In Stock; Cage Type:Plastic; Static Load Rating (kN):10.4; Dynamic Load Rating (kN):13.5; Oil Limiting Speed (r/min):28000; |
| NSK 120TFD2501 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | L:160 mm; Recommended tightening torque for grub screw:7.4 N·m; J6:146 mm; Housing material:Cast iron; A:45 mm; A1:27 mm; J min.:119 mm; H:93 mm; Basic static load rating C0:15.3 kN; N1:14 mm; Mass bearing unit:1.55 kg; J:126 mm; H1:47.6 mm; Limiting speed:1100 r/min; s1:24.3 mm; Fatigue load limit Pu:0.655 kN; A5:22 mm; J7:15.5 mm; Thread grub screw G2:M6; Recommended diameter for attachment bolts, inch G:0.5 in; |
| FAG 540162 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:180mm; Weight:0.02 KGS; B:112mm; Clearance:Standard; Seals or Shields:Open Type; SKU:23236-e1-tvpb-qbl; D:320mm; Availability:In Stock; Cage Type:Plastic; |
| FAG 528876 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Grease Speed Rating n1:3000 rpm; B:43.00 mm; d:90.000 mm; Basic Static Radial Load Rating Co:137000 N; Fillet Radius ra:2.50 mm; Basic Dynamic Radial Load Rating C:159000 N; Oil Speed Rating n2:4000 rpm; D:190.0000 mm; |
| FAG 532584 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | J min.:336.55 mm; P150°:66.7 kN; N1:22.225 mm; Ca:67.793 mm; Pa:20.7 kN; P60°:185 kN; S:4.763 mm; da:103.188 mm; Cap bolt recommended tightening torque:400 N·m; RG:1/2 NPT; J1:69.85 mm; Taconite seal:TER 111; End plug (suffix Y):EPR 14; h:46.831 mm; P180°:81.4 kN; H1:133.35 mm; R1:79.375 mm; Max. speed for Taconite seal:725 r/min; P120°:72.5 kN; P90°:111 kN; |
| FAG 548285 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Mass rod end:10 kg; Specific dynamic load factor K:300 N/mm²; Basic dynamic load rating C:880 kN; α:6 °; l2 max.:349 mm; d:70 mm; Basic static load rating C0:490 kN; l7 min.:85 mm; C1 max.:43 mm; h:265 mm; B:49 mm; l1 min.:132 mm; G:M 72x4; dk:92 mm; d2 max.:162 mm; r1 min.:1 mm; |
| FAG 528562 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Cage Type:Plastic; Grease Limiting Speed (r/min):4500; Clearance:Standard; SKU:3309b-2rstn-nsk; B:39.7mm; Seals or Shields:Two Rubber Seals; Dynamic Load Rating (kN):71100; Static Load Rating (kN):51100; Availability:In Stock; D:100mm; Weight:1.42 KGS; Oil Limiting Speed (r/min):6000; d:45mm; |
| 513828 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Fillet Radius ra:4.00 mm; D:520.0000 mm; Oil Speed Rating Open/Shielded n2:1300 rpm; Grease Speed Rating Open/Shielded n1:1000 rpm; d:380.000 mm; Basic Dynamic Radial Load Rating C:338000 N; Sealed Speed Rating n3:950 rpm; B:65.00 mm; Accessories:Two Seals; Basic Static Radial Load Rating Co:530000 N; |
| FAG 530852 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Static Load Rating (kN):61400; SKU:3212b-2znrtnc3-nsk; Clearance:C3; D:110mm; Seals or Shields:Two Metal Shields; Cage Type:Plastic; d:60mm; Grease Limiting Speed (r/min):3800; B:36.5mm; Oil Limiting Speed (r/min):5000; Dynamic Load Rating (kN):74900; Availability:In Stock; Weight:0.02 KGS; |
| NSK 420TFD6201 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | Availability:In Stock; SKU:23134-e1-tvpb-c3-qbl; Cage Type:Plastic; Weight:0.02 KGS; B:88mm; D:280mm; Clearance:C3; d:170mm; Seals or Shields:Open Type; |
| 527907 DOUBLE ROW TAPERED THRUST ROLLER BEARINGS | d:240 mm; Tolerance housing:H7; Specific dynamic load factor K:25 N/mm²; B:140 mm; Permissible sliding velocity v min.:0 m/s; α:124 °; Coefficient of friction µ min.:0.08; B1:10 mm; Coefficient of friction µ max.:0.15; D:260 mm; Mass bushing:9.71 kg; Specific static load factor K0:45 N/mm²; a:7 mm; Tolerance shaft:e7; Permissible sliding velocity v max.:0.5 m/s; D1:275 mm; |