| Daewoo 40405-00110 Hydraulic Final Drive Motor | C:14 kN; A:36.5 mm; s1:13.5 mm; Weight:0.76 kg; L:139 mm; d:25.4 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; H2:67.8 mm; G:M6x1; |
| Daewoo SOLAR 330 Hydraulic Final Drive Motor | Pre Install Clearance Max:0.0047 in; Oil Lubrication - B/C/O Seal:1200 rpm; Pre Install Clearance Min:0.0037 in; Grease Lubrication - T Seal:2200 rpm; Bearing Number:22216; Dimension RVV:0.67 in; Dimension N:2.930 in; Locking Style:Double V-Lock; Oil Lubrication - M/N Seal:1500 rpm; Dimension F:7.19 in; |
| Daewoo SL76V Eaton Hydraulic Final Drive Motor | Slot Length L3:85.7 mm; Total Length L:150.8 mm; Weight:7.36 lb; Total Height H:120.6 mm; Opening Width N1:19.00 mm; Inside Ring Width B:30.18 mm; Slot Width A1:17.5 mm; Housing Style:Take-Up; Dimension G:2.559 in; Dimension P:2.343 in; |
| Daewoo SOLAR 250LC-V Hydraulic Final Drive Motor | Number of Raceway Ring Rows:Single Track; Precision:Class 0; Size Standards:Metric Series; Allowable Rotational Speed(rpm):9000; Bearing Style:Rubber Seal Type; Outer Ring Shape:Standard; Volume Discount:Available; Type:Ball; |
| Daewoo S340-5 Hydraulic Final Drive Motor | Outer Ring Shape:Flat; Load Direction:Radial Load; Width(mm):8; Inner/Outer Ring Material:440C Stainless Steel; Features:Heat resistant / Ant; Holder Material:304 Stainless Steel; Retaining Ring Size D2 max(mm):30.8; Type:Ball; f Maximum(mm):0.85; Shield Shape:Open; |
| Daewoo SOLAR 71 III Eaton Hydraulic Final Drive Motor | Precision class:P0; Characteristic outer ring frequency, BPF0:15.44 Hz; Radial clearance class:CN; a:4 mm; n:8 mm; Brand:NTN; B:25.5 mm; B2:40.5 mm; C:24 mm; C1:0.8 mm; |
| Daewoo SOLAR 340LC-V Hydraulic Final Drive Motor | Volume Discount:Available; Bearing Part Number:6805; Days to Ship:8 Days; Bearing I.D. d(mm):25; Number of Bearings:Single; Width T(mm):13; Type:Bearings with Housin; Bearing Retained:Yes (with retaining; Shape:Flange Type; |
| Daewoo SOLAR 015 Hydraulic Final Drive Motor | Housing Material:1045 Carbon Steel; Lateral Width L(mm):53; Width T(mm):12; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Height H(mm):20; Days to Ship:10 Days; Shape:T-Shaped; |
| Daewoo 2401-9232 Hydraulic Final Drive Motor | e:0.44; d1:180 mm; Brand:NTN; Dynamic load, C:530 kN; d:130 mm; db min:148 mm; Static load, C0:815 kN; Nlim (oil):2,000 rpm; rs min:4 mm; D:230 mm; |
| Daewoo 180LC Hydraulic Final Drive Motor | L:116 mm; H2:100 mm; N:M14; T min.:-20 °C; Weight:1.93 kg; L1:32 mm; B:42.8 mm; A:54 mm; Recommended tightening torque for set screw:8 Nm; T max.:200 °C; |
| Daewoo SOLAR 140LC-V Hydraulic Final Drive Motor | Machining:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Round flange shape; Seal:Silicone; Stroke:No; d:60; Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):52400; Fit:J7; |
| Daewoo DH130-3 Hydraulic Final Drive Motor | Bolt Size:4 x M30; Dimension R:23.0 in; Shaft Size:10 in; Bearing Type:Split Cylindrical Re; Bearing UPC:013992057686; Bearing - Housing - Seal UPC:013992085474; Series Type:Light Series; Dimension H:4.9 in; Note:This product line wa; Dimension N:19.875 in; |
| Daewoo S280-3 Hydraulic Final Drive Motor | Bearing Retained:No; Shape:Flange Type; RoHS:6; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):8; Seals:ZZ (Double Shield); Housing Material:1045 Carbon Steel; |
| Daewoo DH450 Hydraulic Final Drive Motor | Pillow/Plummer Block Style:Split Cylindrical Ho; Note:This product line wa; Bearing Number:LSE308BX; Bearing UPC:013992026392; Dimension H :4-1/2 in; Bolt Size:4 x 3/4; Cr - Dynamic Load Rating:42145 lbf; Cor - Static Load Rating:52033 lbf; Bearing Type:Split Cylindrical Ex; Maximum Speed:2790 rpm; |
| Daewoo 2401-9121B Hydraulic Final Drive Motor | Designation of housing:PA207-; E:20 mm; J:80 mm; G:M6x1; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; A:48 mm; Weight:1.48 kg; H1:13 mm; A1:27 mm; |
| Daewoo SL55VT Hydraulic Final Drive Motor | G:R1/8"; C:25.7 kN; L:92 mm; B1:51.1 mm; e:20 mm; T max.:100 °C; S:18.8 mm; B:37.6 mm; Designation of bearing:EX207-23G2L3; A1:12.5 mm; |