| Daewoo DH130-2 Hydraulic Final Drive Motor | A:48 mm; S:15.9 mm; H2:84 mm; C0:11.2 kN; A1:25 mm; T max.:100 °C; d:30 mm; T min.:-20 °C; E:18 mm; C:19.5 kN; |
| Daewoo SOLAR 140LC-V Hydraulic Final Drive Motor | Machining:No; Bearing Inner Dia. Shape:Cylindrical Bore Set; Bearing Unit, Type:Round flange shape; Seal:Silicone; Stroke:No; d:60; Unit Body Material:Cast Iron; Basic Load Rating, Dynamic Rating(N):52400; Fit:J7; |
| Daewoo 401-00026A Hydraulic Final Drive Motor | Cg - Geometry Factor:0.124; da - Cone Frontface Backing Diameter:5.63 in; Series:795; Design Units:Imperial; C90 - Dynamic Radial Rating (90 million revolutions)5:19600 lbf; C90(2) - Dynamic Radial Rating (Two-Row, 90 million revolutions)2:34200 lbf; C1 - Dynamic Radial Rating (Two-Row, 1 million revolutions)1:132000 lbf; C1 - Dynamic Radial Rating (1 million revolutions)6:75700 lbf; K - Factor8:1.27; |
| Daewoo S220LC-5 Hydraulic Final Drive Motor | Type:Bearings with Housin; Number of Bearings:Double; Shape:Bottom Mount; T(mm):23 ～ 60; Bearing Used:Deep Groove Ball Bea; Seals:VV (Non-Contact Rubb; Holder Surface Treatment:Black Oxide Coating; RoHS:6; Days to Ship:10 Days; Thickness, Height Indication:T, h Configurable; |
| Daewoo SOLAR 70 III Hydraulic Final Drive Motor | Volume Discount:Available; Width T(mm):14; Flange Shape:Compact Type; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing Part Number:6203; Number of Bearings:Single; Days to Ship:7 Days; Bearing I.D. d(mm):17; Bearing Retained:No; |
| Daewoo S340-5 Hydraulic Final Drive Motor | Outer Ring Shape:Flat; Load Direction:Radial Load; Width(mm):8; Inner/Outer Ring Material:440C Stainless Steel; Features:Heat resistant / Ant; Holder Material:304 Stainless Steel; Retaining Ring Size D2 max(mm):30.8; Type:Ball; f Maximum(mm):0.85; Shield Shape:Open; |
| Daewoo S280-3 Hydraulic Final Drive Motor | Bearing Retained:No; Shape:Flange Type; RoHS:6; Bearing Material:[Steel] Steel; Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Bearing I.D. d(mm):8; Seals:ZZ (Double Shield); Housing Material:1045 Carbon Steel; |
| Daewoo SOLAR 015 Hydraulic Final Drive Motor | Housing Material:1045 Carbon Steel; Lateral Width L(mm):53; Width T(mm):12; Bearing Material:[Steel] Steel; Bearing Retained:Yes (with retaining; Type:Bearings with Housin; Height H(mm):20; Days to Ship:10 Days; Shape:T-Shaped; |
| Daewoo 40405-00110 Hydraulic Final Drive Motor | C:14 kN; A:36.5 mm; s1:13.5 mm; Weight:0.76 kg; L:139 mm; d:25.4 mm; Recommended tightening torque for set screw:3.7 Nm; T min.:-20 °C; H2:67.8 mm; G:M6x1; |
| Daewoo 2401-9121B Hydraulic Final Drive Motor | Designation of housing:PA207-; E:20 mm; J:80 mm; G:M6x1; C:25.7 kN; Recommended tightening torque for set screw:8 Nm; A:48 mm; Weight:1.48 kg; H1:13 mm; A1:27 mm; |
| Daewoo SOLAR 035 Hydraulic Final Drive Motor | Flange Shape:Compact Type; Width T(mm):12; Type:Bearings with Housin; Bearing I.D. d(mm):12; Seals:VV (Non-Contact Rubb; Flange O.D. H(φ):50; Volume Discount:Available; Number of Bearings:Single; RoHS:6; Bearing Used:Deep Groove Ball Bea; |
| Daewoo SOLAR 470LC-V Hydraulic Final Drive Motor | Inner-Ring Set:530ARXS2522; Chamfer rsmin:5.00 mm; Bore d:530.000 mm; Lubrication Groove g:19.3 mm; Lubrication Hole Diameter h:9.5 mm; Backing Housing Diameter Ds:707.0 mm; DUR/DOR F/E:587.000 mm; Angle of Chamfer r1smin:20º; O.D. D:760.000 mm; Backing Shaft Diameter ds:576.0 mm; |
| Daewoo SOLAR 255LC-V Hydraulic Final Drive Motor | ra max:2 mm; Min operating temperature, Tmin:-40 °C; Nref:2,600 rpm; e:0.31; Radial clearance class:CN; Max operating temperature, Tmax:200 °C; Da max:168 mm; Y2:3.24; db min:110 mm; Characteristic cage frequency, FTF:0.42 Hz; |
| Daewoo 401-00422 Hydraulic Final Drive Motor | Unit Body Material:Cast Iron; Fit:J7; Basic Load Rating, Dynamic Rating(N):52400; RoHS:6; Unit, Type:Insert Bearing Unit; Diameter series symbol:Used for Light load; Rolling Element Material:Bearing Steel; Machining:Cast iron cover moun; Days to Ship:8 Days; |
| Daewoo SL75V Aftermarket Hydraulic Final Drive Motor | S:8 mm; T min.:-20 °C; C0:11.5 kN; T max.:100 °C; L:108 mm; Designation of housing:SF206-; A2:45.7 mm; Recommended tightening torque for set screw:8.3 Nm; A1:14 mm; C:15.3 kN; |
| Daewoo 2401-9121A Hydraulic Final Drive Motor | Number of lubrication holes:3; b:7.8 mm; da min:74 mm; ra max:1.5 mm; d2:78.2 mm; e:0.24; Nlim:6,900 rpm; Associated sleeve reference:H313; Max operating temperature, Tmax:200 °C; Fatigue limit load, Cu:26 kN; |